BZYWF - RTV615A, SILICONE POTTING COMPOUND
- MSDS: BZYWF
- Manufacturer: GE SILICONES
- Product Name: RTV615A, SILICONE POTTING COMPOUND
- National Stock Number: 8030-LLNU01010
Product Identification
Product ID:RTV615A, SILICONE POTTING COMPOUND
MSDS Date:10/05/1993
FSC:8030
NIIN:LLNU01010
Kit Part:Y
MSDS Number: BZYWF
Responsible Party
WATERFORD, NY 12188
US
Emergency Phone: 518-237-3330
Info Phone: 518-237-3330
Preparer: DA POLSINELLI
Cage: GESIL
Contractor
Telephone: 518-237-3330/800-332-3390
Cage: 01139
Ingredients
50 PPB
CAS: 71-43-2
RTECS: CY1400000
Fraction By Weight: <0.1%
OSHA PEL SEE 1910.1028
ACGIH TLV: 10 PPM; A2
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
2 PPM
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: <0.1%
OSHA PEL 200 PPM
ACGIH TLV: S, 50 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
VINYL POLYSILOXANE; (VINYLPOLYDIMETHYLSIOXANE)
CAS: 68083-19-2
Fraction By Weight: 60-80%
OSHA PEL N/K
ACGIH TLV: N/K
VINYL RESINS; (VINYL CONTAINING RESIN)
CAS: 68584-83-8
Fraction By Weight: 10-30%
OSHA PEL N/K
ACGIH TLV: N/K
137
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST, SKIN CONT & INHAL:NONE KNOWN.
EYE CONT:MAY CAUSE MILD IRRIT. TARGET ORGAN EFTS:NONE KNOWN.
OTHER:PROD CNTNS METHYLPOLYSILOXANES WHICH CAN GENERATE
FORMALDEHYDE @ APPROX 300F (150C) & ABOVE, IN ATMS WHICH CNTN
OXYG. FORMALDEHYDE IS SKIN & RESP SENSIT, EYE & THROAT IRRIT, ACUTE
TOX, & POTNTL (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZS:CANCER HAZ. AN MSDS FOR FORMALDEHYDE
IS AVAIL FROM MFR. TOLUENE APPEARS ON NAVY OCCUP CHEM REPRO HAZS
LIST. SEEK CONSULTATION FROM APPROP HLTH PROFESSIONALS CONCERNING
LATEST HAZ LIST INFO & SAFE HNDLG & EXPOS INFO . WARNING! PROD
CNTNS CHEM KNOWN TO STATE OF CA TO CAUSE BIRTH DEFECTS /OTHER HARM.
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:INHALATION:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
O*2/ARTF RESP) . INGESTION:RINSE OUT MOUTH WITH WATER SEVERAL
TIMES. SKIN:WASH WITH SOAP AND WATER. EYES:IN CASE OF CONTACT,
IMMEDIATELY F LUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES AND GET MEDICAL ATTENTION IF IRRITATION PERSISTS. NOTE TO
PHYSICIAN:NONE KNOWN.
Fire Fighting
Flash Point Method:TOC
Flash Point:>250F,>121C
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:SENSITIVITY TO STATIC
DISCHARGE:SENSITIVITY TO STATIC DISCHARGE IS NOT EXPECTED.
Accidental Release
Spill Release Procedures:WIPE, SCRAPE/SOAK UP IN AN INERT MATL & PUT IN
CNTNR FOR DISP. WASH WALKING SURFS W/DETERGENT & WATER TO REDUCE
SLIPPING HAZ. WEAR PROPER PROT EQUIP AS SPECIFIED IN CONTROL
MEASURES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE KNOWN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . NONE KNOWN.
Ventilation:NONE KNOWN.
Protective Gloves:CLOTH GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
SHOWER . NONE KNOWN.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>500F,>260C
Vapor Density:1.0
Spec Gravity:0.99 (H*2O=1)
Solubility in Water:INSOLUBLE (20C)
Appearance and Odor:CLEAR LIQUID WITH A MILD ODOR.
Percent Volatiles by Volume:<1.0
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
SILICON DIOXIDE, FORMALDEHYDE.
Disposal
Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS. BURY IN A LICENSED LANDFILL
OR BURN IN AN APPROVED INCINERATOR ACCORDING TO FEDERAL, STATE AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.